top of page
CNC Blow Back Digital Air Plasma Cutter CUT60DN, Non-HF Pilot Arc Non-Touch Plas
CUT60DN
CNC Blow Back Digital Air Plasma Cutter CUT60DN, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled
 
 
CUT60DN is 55Amps Plasma Cutter With Blow Back Non-HF Pilot Arc Function
 
  • The CUT60DN plasma cutting machine, Adopt IGBT soft watch technology
  • Input AC110V/220V±15%, With CNC Port Connector, Easy works with CNC system
  • Pilot arc function ,the torch will have an arc without touching the workpiece
  • 63A power break, 45L/min Air compressor is suggested
  • The air gauge regulator air filter are installed on machine
  • Simple operating, smooth cutting surface
  • Fan cooled ensuring better performance and durability
  • Suitable for cutting stainless steel, copper, iron and aluminium metal etc
  • This is a powerful cutting machine with good performance and can be used in factories
 
 
 
 
 
 
 
  • Machine with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table
 
 
  • This machine Easy works with CNC cutting table, Machine have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.
  • The specific connection method can be found in the manual
 
 
  • This machine Suitable cut standard mild steel,stainless steel, Alloy steel,copper, Aluminum.
  • The cutting thickness may different depend on different voltage current and air pressure.
 
 
  • The plasma cutter with Non-HF Pilot Arc function ,Under this function, Pilot arc will not interference to machine( HF Pilot Arc will interference to machine)
 
 
 

CNC Blow Back Digital Air Plasma Cutter CUT60DN, Non-HF Pilot Arc Non-Touch Plas

C$1,200.00Price

  • Parameters

    Input voltage: AC110/220V+/-15%
    Output current: 55Amps Rated input capacity: 8.6 KVA
    Output Current range: 15A-55A
    Efficiency: 85%
    Duty cycle: 60%@55Amps 75℉
    Insulation class: B
    Max cutting thickness: 25mm@55A 220V 70PSI (0.6Mpa)
    Quality Cutting thickness: 20mm@55A 220V 70PSI
    Cutting speed: 200mm/min at 20mm thick metal 70PSI (Air Pressure)
    HF Arc starting: Non-HF Pilot Arc, Non-Touch metal

  • What included in the package:

     

    • 1 x Plasma Cutter (Machine)
    • 1 x 5 meters Cutting torch ( IP65 Non-HF Blow back air Pilot arc ,use IPT65 Consumables)
    • 1 x Earth clamp with cable (3 meters)
    • 1 x 2 meter Air Hose
    • 2 x Tip (Nozzle #1.0)
    • 2 x Electrode
    • 2 x Hose Clamp
    • 1 x 2 pins Connector
    • 1 x 4 pins Connector
    • 1 x Manual
bottom of page